How to Replace Feed Handles on Delta Drill Press: Step-by-Step Guide

Are you struggling with a feed handle that’s rough and hard to turn on your Delta drill press? It’s a common issue, but the good news is that replacing the handle is quick and easy. In this step-by-step guide, we will walk you through the process of replacing the feed handles on your Delta drill press so you can get back to your work with ease. Just like changing a tire on a car, you’ll be surprised at how simple it is once you know how to do it.
So, grab your tools and let’s get started!
What You Will Need
If you own a Delta drill press and are having trouble with the feed handles, you may need to replace them. The process is straightforward and requires a few basic supplies. First, you need to gather a replacement feed handle that matches the size and shape of the original handle.
This can usually be found at a hardware store or online retailer. You will also need a wrench or socket set to remove the old handle and install the new one. Additionally, you may need a hammer or mallet to help tap the new handle into place.
Once you have these supplies, you’ll be ready to replace the feed handles on your Delta drill press and get back to working with ease and efficiency.
List of required tools and supplies
Before beginning any DIY project, it is important to make sure you have all the right tools and supplies. This will not only make your project go smoother but will also ensure your safety. Depending on the project you plan to tackle, the tools and supplies required may vary.
However, some essential items should always be on hand. You will need a basic toolkit that includes a hammer, screwdrivers, pliers, measuring tape, and level. For larger projects, power tools such as a drill, circular saw, and jigsaw may be required.
Additionally, supplies such as nails, screws, sandpaper, paintbrushes, and paint are also crucial. Make sure to have everything on hand before starting your project to avoid any unnecessary delays. Investing in good quality tools and supplies will not only save you money in the long run but will also make your DIY endeavors more enjoyable.

Preparing for Replacement
Replacing feed handles on your Delta drill press can be a straightforward process if you follow the correct steps. First, make sure you have the proper replacement parts for your specific model. Then, ensure that your drill press is turned off and unplugged before beginning any work.
Next, remove the old feed handles by loosening the set screws that hold them in place and sliding them off the shafts. Take care not to lose any small parts, washers, or bushings that may be attached to the handles or shafts. Once the old handles are removed, slide the new handles onto the shafts and tighten the set screws back into place, being careful not to overtighten.
Finally, test the new handles to make sure they move smoothly and operate correctly before using your drill press again. With these steps, you can replace your Delta drill press feed handles easily and safely.
Safety precautions to take before beginning
When it comes to replacing a broken windowpane, safety should always come first. Before you even begin the replacement process, there are a few safety precautions you should take. First and foremost, make sure you have all the necessary tools and equipment ready, including gloves, safety glasses, and a dust mask.
You should also wear appropriate clothing that covers your arms and legs to protect yourself from sharp glass shards. It’s also important to clear the area around the window, removing any objects that could potentially cause an accident. Finally, if you’re not comfortable with the task at hand or are unsure of what to do, it’s always best to seek the help of a professional.
By taking these precautions, you can ensure a safe and successful windowpane replacement.
Removing the Old Handles
When preparing to replace old handles, the first step is removing the existing ones. This can be a bit tricky, but with the right tools and technique, it can be done relatively easily. First, identify the type of handle you have and check for any screws or bolts holding it in place.
If there are any, gently unscrew or unbolt them using an appropriate tool. If the handle is held in place by pins or clips, use pliers to carefully remove them. It’s important to take your time when removing the old handles to avoid damaging the door or furniture piece.
Once the old handle is removed, inspect the area for any damage or wear that may need to be addressed before installing the new handles. With a little patience and care, the old handles can be removed and you’ll be ready to move on to the next step in the replacement process. The main keyword used organically in this blog is “old handles”.
Step-by-Step guide to removing old handles
When it comes to replacing old handles, the first step is preparing for the replacement. This involves gathering all the necessary tools and materials that you’ll need for the job. Start by assessing the type of handle you have and the type of replacement handle you want to install.
Then, ensure that you have the new handle with you, along with any screws, bolts, and other hardware that may be needed. You’ll also need a set of pliers, a screwdriver, and potentially a drill to remove the old handles. Before beginning the process, make sure to turn off any water or electricity supply in the area where you’ll be working.
Taking these steps will help you to ensure that the replacement process goes smoothly and safely. With the right tools, materials, and preparation, you’ll be well on your way to successfully replacing old handles with new ones.
Installing the New Handles
So, you want to know how to replace feed handles on your Delta drill press? Well, it’s actually quite simple! The first step is to ensure that you have the correct replacement handles for your machine. Once you have them, start by removing the old handles by gently pulling them off the spindle. Next, put the new handles onto the spindle and make sure they are secure.
If you can wiggle the handles around, they may not be on tight enough, so give them an extra turn. Once the handles are securely fastened, test them out by turning the drill press on and using the feed handles to move the spindle up and down. If everything seems to be working properly, congratulations! You’ve successfully replaced the feed handles on your Delta drill press.
Step-by-Step guide to installing new handles
Installing new handles can be a simple and cost-effective way to upgrade the appearance of your doors or cabinets. The first step is to select the type of handle that best fits your needs and aesthetic preferences. Then, carefully measure the existing holes in your door or cabinet to ensure a proper fit for the new handle.
After that, use a template to mark the placement of the new handle holes. Next, drill the holes based on the template markings and install the new handles using screws or bolts. Finally, test the new handles to ensure they function properly and make any necessary adjustments.
By following these steps, you can successfully install new handles and give your doors or cabinets a fresh new look.
Testing and Adjusting the Handles
If you’re thinking about how to replace feed handles on Delta drill press, one of the most critical steps is testing and adjusting the handles. It’s crucial to ensure that the handles are working correctly and can perform the necessary functions to carry out your drilling tasks. Testing the handles involves checking how smoothly they move and ensuring that they are tightly secured to the spindle or quill.
Adjusting the handles may include tightening or loosening parts, depending on the type of drill press you have. It’s best to consult your owner’s manual or reach out to a professional for guidance if you’re not entirely sure how to adjust the handles. Making sure your drill press handles are in working order is essential to keeping you safe and ensuring that your work turns out successfully.
Testing and fine-tuning the new handles
After designing and installing the new handles, it is important to test and adjust them for optimal performance. This can involve various methods, such as applying pressure and stress to the handles to see how they hold up, testing their durability, and ensuring they provide a comfortable grip for users. Additionally, adjustments may need to be made if the handles are too loose or tight, or if they do not align properly.
The goal is to make sure that the handles are safe and easy to use, providing a smooth and reliable experience for anyone who interacts with them. By fine-tuning the handles, you can ensure that they are up to the task and ready to serve their purpose effectively.
Conclusion: Enjoy Your Newly Replaced Feed Handles
So there you have it – replacing feed handles on a Delta drill press doesn’t have to be a daunting task. By following these simple steps and with a little bit of elbow grease, you can have your machine up and running smoothly once again. And who knows, maybe you’ll be so proud of your handiwork that you’ll start tinkering with other projects too.
Just remember, even if you don’t succeed at first, keep trying – you never know what you might discover. After all, as they say, “the greatest glory in living lies not in never falling, but in rising every time we fall.”
FAQs
What are feed handles on a Delta drill press?
Feed handles are the knobs or levers used to adjust the vertical movement of the drill bit on a Delta drill press.
Why would you need to replace feed handles on a Delta drill press?
Feed handles can become worn, damaged, or break over time with extended use of the drill press. Replacing them can prevent further damage to the drill press and ensure accurate adjustments to the drill bit.
What tools will I need to replace feed handles on a Delta drill press?
You will need a screwdriver, pliers, and a replacement Delta feed handle for your specific model of drill press.
How do I remove the old feed handle from a Delta drill press?
Use a screwdriver to remove the screw holding the old feed handle in place. Then, use pliers to hold onto the old handle while turning it counterclockwise to unscrew it from the spindle.
How do I install the new feed handle on a Delta drill press?
Screw the new feed handle onto the spindle by turning it clockwise, then tighten the screw with a screwdriver to secure it in place.
Can I use a generic feed handle on my Delta drill press?
No, it is recommended to use a replacement feed handle specifically designed for your model of Delta drill press to ensure proper fit and function.
Can I replace feed handles myself or should I seek professional assistance?
If you have experience with basic mechanical repairs and proper tools, you can likely replace feed handles on your Delta drill press yourself. However, if you are unsure or uncomfortable with the process, it is recommended to seek professional assistance.